Package Contents
UniFi WiFi BaseStation XG |
Adjustment Bracket |
Pole Clamp |
Carriage Bolts (Qty. 4) |
Flange Nuts (Qty. 4) |
Lag Screws (Qty. 4) |
Gigabit PoE (50V, 1.2A) |
Power Cord |
Installation Requirements
- 13 mm wrench
- Category 5 (or above) UTP cable for indoor installations
|
IMPORTANT: The UWB-XG-BK requires the UniFi Network Application v5.7 or higher, available at: |
---|
System Requirements
- Linux, Mac OS X, or Microsoft Windows 7/8/10
- Java Runtime Environment 1.8 or above recommended
- Web Browser: Google Chrome (Other browsers may have limited functionality.)
- UniFi Network Application v5.7 or newer (available at: ui.com/download/unifi)
Hardware Overview
LED
Ports
10 GbE |
||
---|---|---|
The 10 GbE port is a 1/10 Gbps Ethernet port used to connect to the LAN and DHCP server. It can also be used to connect the power.
|
||
1 GbE |
||
The 1 GbE port is a 10/100/1000 Ethernet port used for bridging. It can also be used to connect the power. |
||
Reset |
||
The Reset button serves two functions for the UWB-XG-BK:
|
VESA Mounting
If you choose to use your own mount, remove the four M4 x 10 screws from the back of the UWB-XG-BK and detach the pre-installed mount.
Hardware Installation
|
Note: The UWB-XG model may be installed indoors or outdoors; however, the UWB-XG-BK model must only be installed indoors. Due to its darker color, it can potentially overheat if installed outdoors. |
---|
Pole Mount
- Proceed to Connecting Ethernet.
Wall Mount
To mount the UWB‑XG‑BK on a wall, securely attach the Adjustment Bracket to the wall using the four Lag Screws.
|
Note: The Adjustment Bracket must attach directly to a stud or other stable structure. |
---|
- Proceed to Connecting Ethernet.
Connecting Ethernet
|
Note: If you are using TOUGHCable, we recommend attaching the TOUGHCable Connector(s) after you insert the cable(s) into the cable gland(s). |
---|
The cable gland is comprised of the following components:
- Repeat steps 1-14 to connect an Ethernet cable to the 1 GbE port if one of the following conditions applies:
- You will use the 1 GbE port for bridging.
- You will use the 1 GbE port for 802.3bt PoE.
- You will use the included Gigabit PoE adapter to power the UWB-XG-BK.
|
Note: By default, the UWB-XG-BK is set to 15 dBi for its small-cell gain. To switch to its large-cell gain of 10 dBi, use the UniFi Network Application. |
---|
Connecting Power
|
IMPORTANT: Using the 10GbE port requires enabling flow control on the upstream switch port’s configuration for maximum performance. |
---|
OR
Specifications
UWB-XG-BK |
|
Dimensions (without Mount) |
471.1 x 257.5 x 94.3 mm (18.55 x 10.14 x 3.713") |
---|---|
Weight (without Mount) |
3.2 kg (7.055 lb) |
Networking Interface |
(1) 10/100/1000 RJ45 Ethernet Port (1) 1/10 Gbps ICM Ethernet Port |
Button |
Reset |
LED |
RGB, Application-Controllable |
Power Method |
802.3bt PoE |
Power Supply |
50VDC, 1.2A Gigabit PoE |
Max. Power Consumption |
31W |
Supported Voltage Range |
44-57VDC |
Max. TX Power |
25 dBm |
MIMO |
(3) 4 x 4 |
Operating Frequency |
5 GHz |
Antenna |
Integrated Dual-Mode Antenna Array |
Antenna Gain |
|
Small Cell | 15 dBi |
Large Cell | 10 dBi |
Antenna Beamwidth |
|
Small Cell | 50° |
Large Cell | 90° |
Wi-Fi Standards |
802.11 a/n/ac/ac-wave2 |
Wireless Security |
WEP, WPA-PSK, |
Mounting |
VESA-Compatible Mount Pole/Wall (Brackets Included) |
Operating Temperature |
-40 to 70° C (-40 to 158° F) |
Operating Humidity |
5 to 95% Noncondensing |
Weatherproofing |
IP67 |
Certifications |
CE, FCC, IC |