Package Contents
 |
|---|
| Camera |
 |
|---|
| PoE Adapter (48V, 0.5A) |
 |
|---|
| Power Cord |
 |
|---|
| Hex Keys |
 |
|---|
| Metal Strap |
 |
|---|
| Pan Head Screws (M4x30, Qty. 4) |
 |
|---|
| Screw Anchors (Qty. 4) |
 |
|---|
| Ethernet Sleeve |
 |
|---|
| Mounting Template |
Installation Requirements
Wall-Mounting:
- Drill
- Drill bit, 7 mm
- Hole saw, 45 mm (optional)
- Phillips screwdriver
Pole-Mounting:
- Screwdriver or 7 mm socket driver
Hardware Overview
 Ethernet Port |
|---|
The 10/100 Ethernet port is used to connect the power and should be connected to the LAN and DHCP server. |
 Reset Pins |
|
To reset to factory defaults, use the hex keys or an electric conductor to short the two pins. |
Base and Camera Hex Bolts |
|---|
Use the small Hex Key to adjust the base and camera rotation. |
Tilt Hex Bolt |
|
Use the large Hex Key to adjust the tilt. |
Hardware Installation
Proceed to the appropriate mounting instructions:
Wall Mounting
- Proceed to “Connecting Ethernet”.
Optional
Optional
| Note: Depending on your application, you may prefer to connect the Ethernet cable to the built-in cable first. If so, proceed to “Connecting Ethernet” and return to step 5. |
|---|
OR
| Note: There are two recessed areas for the built-in cable on the mounting bracket base. Place the cable in the recessed area closest to your power source. |
|---|
Pole Mounting
Connecting Ethernet
Optional
You can fit the included Ethernet Sleeve over the Ethernet connector to make it easier to remove the cable.
| Note: When properly tightened, the seal should be extruding from the compression nut to prevent water from entering. |
|---|
Connecting Power
OR
Adjusting the Camera View
For details on using the UniFi Video software, refer to the User Guide at ui.com/download/unifivideo
Specifications
|
UVC-Pro |
|
|
Dimensions |
322 x 100 x 100 mm (12.67 x 3.93 x 3.93") |
|---|---|
|
Weight |
2.15 kg (4.73 lbs) |
|
Ports |
(1) 10/100 Ethernet Port |
|
Sensor |
3M WDR Sensor |
|
Lens |
3X Optical Zoom, f=3-9 mm |
|
Infrared |
Yes |
|
Buttons |
Factory Reset Button |
|
Power Method |
Passive PoE (48V, 0.5A), 802.3af |
|
Power Supply |
48V, 0.5A PoE Adapter Included |
|
Max. Power Consumption |
12.5W |
|
Mounting |
Pole/Wall/Ceiling Adapter Kit Included |
|
Protection Rating |
IP67 Waterproof |
|
Operating Temperature |
-40 to 50° C (-40 to 122° F) |
|
Operating Humidity |
20 - 90% Noncondensing |
|
Certifications |
CE, FCC, IC |
|
Video |
|
|
Video Compression |
H.264 |
|---|---|
|
Resolution |
1080p Full HD |
|
Maximum Frame Rate |
25 FPS |
|
Image Setting |
Brightness, Contrast, Sharpness, Saturation, Noise Reduction, 50 Hz/60 Hz |
|
General |
|
|
Processor |
ARM 1136J-S 528 MHz |
|---|---|
|
Memory |
256 MB DDR3, 256 MB Flash |
|
View Angle |
44.4° W - 15.7° T (V) 81.0° W - 27.9° T (H) 94.0° W - 32.1° T (D) |