×

Click for
Table of Contents

menuUVC-G3-PRO Quick Start Guide

Package Contents

Camera
Tightening Tool
Screw Anchors (Qty. 2)
Self-Tapping Screws (Qty. 2)
Pole Mount Bracket
Machine Screws (Qty. 2)

Installation Requirements

Hardware Overview

Ethernet Port

10/100 RJ45 port connects to an 802.3af/802.3at or 24V Passive PoE switch for PoE power and data.

Reset Button

To reset to factory defaults, press and hold the Reset button for more than 10 seconds while the camera is powered on.

Hardware Installation

Wall/Ceiling Mount

  1.  
  2. Or

  3. Proceed to the Connecting Power section.

Pole Mount

Connecting Power

The UVC G3 Pro supports 802.3af, 802.3at, and 24V Passive PoE and can be powered by any 802.3af/802.3at or 24V Passive PoE compliant switch, such as a UniFi PoE Switch.

Connect the Ethernet cable from the camera directly to a PoE port on the switch.

Setting Up UniFi Protect via App

Download and install the UniFi Protect app to configure the UVC-G3-PRO.

Launch the UniFi Protect app and follow the on-screen instructions to complete setup.

Adjusting the Camera View

Specifications

UVC-G3-PRO

Dimensions
(Without Mounting Plate)

Ø 86 x 153 mm (Ø 3.39 x 6.02")

Weight
(Without Mounting Plate)

700 g (1.54 lb)

Enclosure

UV Stabilized Polycarbonate and Die-Cast Aluminum

Networking Interface

(1) 10/100 Ethernet Port

Sensor

Sony IMX290, 1/2.8"

Lens

3-9 mm, f/1.2-f/2.1 Powered Zoom Lens

Field of View

 

Wide 108° (H), 58° (V), 125° (D)
Tele 37° (H), 20° (V), 43° (D)

Night Mode

IR LEDs with Mechanical IR Cut Filter

Video Compression

H.264

Resolution

1080p Full HD (1920 x 1080)

Maximum Frame Rate

30 FPS

Image Settings

Flip, Brightness, Contrast, WDR, Hue, Infrared, Sharpness, Saturation, Denoise, 50/60 Hz Flicker Reduction

Management Interface

 

Managed Mode UniFi Protect
Standalone Mode Camera Integrated Web UI

Microphone

Yes

Max. Power Consumption

12.5W

Power Method

IEEE 802.3af/at Type 2 PoE or 24V Passive PoE

Power Supply

802.3af/802.3at or 24V Passive
PoE Switch

Buttons

Factory Reset Button

Mounting

Wall/Ceiling (Kits Included)
Pole (Bracket Included)

Operating Temperature

-20 to 50° C
-4 to 122° F

Operating Humidity

0 to 90% Noncondensing

Weatherproofing

IP67