×

Click for
Table of Contents

menuUSG Quick Start Guide

Package Contents

UniFi Security Gateway
Power Adapter (12V, 1A)
Power Cord
Screws (Qty. 2)
Screw Anchors (Qty. 2)

UniFi Controller System Requirements

Hardware Overview

Ports Panel

Console

RJ45 serial console port for CLI management. Use a RJ45-to-DB9 serial console cable to connect the Console port to your computer. Then configure using the following settings:

  • Baud rate 115200
  • Data bits 8
  • Parity NONE
  • Stop bits 1
  • Flow control NONE

Reset

Resets to factory defaults. The UniFi Gateway should be powered on. Press and hold the Reset button for about 10 seconds until the right LED on the WAN 2 / LAN 2 port starts flashing and then becomes solidly lit. After a few seconds, the LED will turn off, and the UniFi Gateway will automatically reboot.

WAN 1 Port

Supports 10/100/1000 Ethernet WAN connections. Default setting is DHCP client.

LAN 1 Port

Supports 10/100/1000 Ethernet LAN connections. Default setting is DHCP Server.
Server IP: 192.168.1.1/24

WAN 2 / LAN 2 Port

Supports 10/100/1000 Ethernet connections. Configure the port using the UniFi Gateway configuration interface.

LEDs

System LED

Click here for detailed descriptions.

Power LED

Off

Power Off

Green

Power On

Speed/Link/Act LED

Off

No Link

Amber

Link Established at 10/100 Mbps

Amber Flashing

Link Activity at 10/100 Mbps

Green

Link Established at 1000 Mbps

Green Flashing

Link Activity at 1000 Mbps

Hardware Installation

Wall-Mounting (Optional)

Connecting Power

Network Connections

Optional WAN Port Configuration via Layer 3

By default, the WAN port is set to DHCP so it can be assigned network settings by the service provider. To change the setting, connect a computer directly (or through a switch) to the LAN 1 port of the UniFi Gateway.

  1. From a web browser, go to https://setup.ui.com

  2. Enter your Username and Password. Click Sign In.

  3. Note: If the UniFi Gateway has not been adopted by a UniFi Controller, the login window will be skipped and the Setup window will appear.

  4. In the Setup window, click Edit Configuration to configure the WAN port to DHCP, Static IP, or PPPoE.

For information on using the UniFi Controller software, refer to the User Guide located on our website at: ui.com/download/unifi

Specifications

USG

Dimensions

135 x 135 x 28.3 mm

(5.32 x 5.32 x 1.11")

Weight

366 g (12.9 oz)

Networking Interfaces

 

Serial Console Port (1) RJ45 Serial Port
Data Ports (3) 10/100/1000 Ethernet Ports

Max. Power Consumption

7W

Power Supply

12VDC, 1A Power Adapter (Included)

Supported Voltage Range

9 to 24VDC

LEDs

 

System Status
Serial Console Port Power
Data Ports Speed/Link/Activity

Layer 3 Forwarding Performance

 

Packet Size: 64 Bytes 1,000,000 pps
Packet Size: 512 Bytes or Larger 3 Gbps (Line Rate)

Processor

Dual-Core 500 MHz, MIPS64 with Hardware Acceleration for Packet Processing

System Memory

512 MB DDR2 RAM

On-Board Flash Storage

2 GB

Rackmount

Yes

Operating Temperature

-10 to 45° C (14 to 113° F)

Operating Humidity

10 to 90% Noncondensing

Certifications

CE, FCC, IC