×

Click for
Table of Contents

menuUS-24, US-48 Quick Start Guide

Package Contents

US-24

OR

US-48

Power Cord
Rack-Mount Brackets (Qty. 2)
Bracket Screws (Qty. 8)
Mounting Screws (Qty. 4)
Cage Nuts (Qty. 4)
Rubber Feet (Qty. 4)

Installation Requirements

Note: Although the cabling can be located outdoors, the UniFi Switch itself should be housed inside a protective enclosure.

System Requirements

Hardware Overview

System LED

Click here for detailed descriptions.

RJ45 Link/Speed/Activity LED

Off

No Link

Amber

Link Established at 10/100 Mbps

Flashing Indicates Activity

Green

Link Established at 1000 Mbps (1 Gbps)

Flashing Indicates Activity

SFP+ Link/Speed/Activity LED (US-48 only)

Off

No Link

Green

Link Established at 1 Gbps

Flashing Indicates Activity

White

Link Established at 10 Gbps

Flashing Indicates Activity

SFP Link/Speed/Activity LED

Off

No Link

Green

Link Established at 1 Gbps

Flashing Indicates Activity

RJ45 Ports

RJ45 ports support 10/100/1000 Ethernet connections.

SFP+Ports (US-48 only)

Hot-swappable SFP+ ports support 10 Gbps connections.

SFP Ports

Hot-swappable SFP ports support 1 Gbps connections.

Reset Button

This button serves two functions for the UniFi Switch:

  • Press and release the Reset button to restart the device.
  • Press and hold the Reset button (for at least five seconds) to restore the device to its factory default settings.

Back Panel Ports

Console Port

RJ45 serial console port for Command Line Interface (CLI) management. Use an RJ45-to-DB9, serial console cable, also known as a rollover cable, to connect the Console port to your computer. Then configure the following settings as needed:

  • Baud rate 115200
  • Data bits 8
  • Parity NONE
  • Stop bits 1
  • Flow control NONE

DC Input

The 25VDC input can connect a redundant or stand-alone DC power source (not included) with minimum power: 25W (US-24) or 56W (US-48), 25 to 16V, and 2.5 mm DC power inline connector.

Note: You can use the redundant DC power source as a hot spare; if the internal AC/DC power supply no longer provides power, then the UniFi Switch will switch to the DC power source without interrupting its operation.

Power Port

Connect the included Power Cord to the Power port.

Hardware Installation

Mounting in a Rack (Optional)

  1.  
  2. OR

Connecting Power

Connecting Ethernet

Using SFP Ports

For information about compatible fiber SFP modules, visit: community.ubnt.com/unifi

Specifications

US-24

Dimensions

443 x 43 x 221 mm (17.44 x 1.69 x 8.70")

Weight

 

Rack-Mount Brackets Included 2.60 kg (5.70 lb)
Rack-Mount Brackets Excluded 2.51 kg (5.53 lb)

Enclosure Characteristics

SGCC Steel

Max. Power Consumption

24W

Total Non-Blocking Line Rate

26 Gbps

Power Method

 

AC 100-240 VAC / 50-60 Hz Universal Input
DC DC 25W, 25 to 16V, with 2.5 mm
DC Power Inline Connector

Power Supply

AC/DC Internal 20W DC

ESD/EMP Protection

Air ± 24 kV, Contact ± 24 kV

Operating Temperature

-5 to 40° C (23 to 104° F)

Operating Humidity

5 to 95% Non-Condensing

Shock and Vibration

ETSI300-019-1.4 Standard

Interfaces

 

Networking (24) 10/100/1000 Mbps RJ45 Ethernet Ports
(2) 1 Gbps SFP Ethernet Ports
Management (1) RJ45 Serial Out-of-Band, Ethernet In-Band

LEDs Per Port

 

RJ45 Data Ports Speed/Link/Activity
SFP Data Ports Speed/Link/Activity

Rack Mount

Yes, 1U

Certifications

CE, FCC, IC

US-48

Dimensions

443 x 43 x 286 mm (17.44 x 1.69 x 11.26")

Weight

 

Rack-Mount Brackets Included 3.65 kg (8.06 lb)
Rack-Mount Brackets Excluded 3.56 kg (7.85 lb)

Enclosure Characteristics

SGCC Steel

Max. AC Power Consumption

56W

Total Non-Blocking Line Rate

70 Gbps

Power Method

 

AC 100-240 VAC / 50-60 Hz Universal Input
DC DC 56W, 25 to 16V, with 2.5 mm
DC Power Inline Connector

Power Supply

AC/DC Internal 56W DC

ESD/EMP Protection

Air ± 24 kV, Contact ± 24 kV

Operating Temperature

-5 to 40° C (23 to 104° F)

Operating Humidity

5 to 95% Non-Condensing

Shock and Vibration

ETSI300-019-1.4 Standard

Interfaces

 

Networking (48) 10/100/1000 Mbps RJ45 Ethernet Ports
(2) 1/10 Gbps SFP+ Ethernet Ports
(2) 1 Gbps SFP Ethernet Ports
Management (1) RJ45 Serial Out-of-Band, Ethernet In-Band

LEDs Per Port

 

RJ45 Data Ports Speed/Link/Activity
SFP Data Ports Speed/Link/Activity

Rack Mount

Yes, 1U

Certifications

CE, FCC, IC

Safety Notices

  1. Read, follow, and keep these instructions.
  2. Heed all warnings.
  3. Only use attachments/accessories specified by the manufacturer.

Warning

WARNING: Failure to provide proper ventilation may cause fire hazard. Keep at least 20 mm of clearance next to the ventilation holes for adequate airflow.

Warning

WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.

Warning

WARNING: Do not use this product in location that can be submerged by water.

Warning

WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.

Electrical Safety Information

  1. Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified may result in improper operation, damage to the equipment or pose a fire hazard if the limitations are not followed.
  2. There are no operator serviceable parts inside this equipment. Service should be provided only by a qualified service technician.
  3. This equipment is provided with a detachable power cord which has an integral safety ground wire intended for connection to a grounded safety outlet.
    1. Do not substitute the power cord with one that is not the provided approved type. Never use an adapter plug to connect to a 2-wire outlet as this will defeat the continuity of the grounding wire.
    2. The equipment requires the use of the ground wire as a part of the safety certification, modification or misuse can provide a shock hazard that can result in serious injury or death.
    3. Contact a qualified electrician or the manufacturer if there are questions about the installation prior to connecting the equipment.
    4. Protective earthing is provided by Listed AC adapter. Building installation shall provide appropriate short-circuit backup protection.
    5. Protective bonding must be installed in accordance with local national wiring rules and regulations.

Limited Warranty

ui.com/support/warranty

The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and, where applicable, specify arbitration instead of jury trials or class actions.

Compliance

FCC

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operations of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

ISED Canada

CAN ICES-3(A)/NMB-3(A)

Australia and New Zealand

RCM

Warning: This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference.

CE Marking

CE marking on this product represents the product is in compliance with all directives that are applicable to it.

CE

WEEE Compliance Statement

Declaration of Conformity

Online Resources

SupportCommunityDownloads