Package Contents

Installation Requirements

• Pole-mounting: 7 mm socket wrench or screwdriver
• Wall-mounting: Drill and 6 mm drill bit
• Phillips screwdriver
• Shielded Category 5 (or above) cabling should be used for all outdoor wired Ethernet connections and should be grounded through the AC ground of the PoE.

  We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For more details, visit ui.com/toughcable

System Requirements

• Linux, Mac OS X, or Microsoft Windows 7/8/10
• Java Runtime Environment 1.6 (1.8 or newer recommended)
• Web Browser: Mozilla Firefox, Google Chrome, Microsoft Edge, or Microsoft Internet Explorer 11
• UniFi Network Application v5.x or newer, available at: ui.com/download/unifi

Hardware Overview

LED

Ports

Secondary
The Secondary Ethernet port is a 10/100 Ethernet port used for bridging.
Reset
The Reset button serves two functions for the UniFi AP: Restart Press and release the Reset button quickly. Restore to Factory Default Settings Press and hold the Reset button for more than five seconds.
Main
This 10/100 Ethernet port is used to connect the power and should be connected to the LAN and DHCP server.

Hardware Installation

The UniFi AP can be mounted to a wall or on a pole. Perform the steps for the appropriate installation:

• “Wall Mounting”
• “Pole Mounting”

Wall Mounting

1. 

2. 

3. 

4. 

5. 

6. 

Pole Mounting

1. 

2. 

3. 

4. 

Connecting Ethernet

1. 

2. 

3. 

Connecting Power

OR

Installer Compliance Responsibility

This device must be professionally installed and it is the professional installer’s responsibility to make sure the device is operated within local country regulatory requirements.

Antenna

Select your antenna from the list. Transmit output power is automatically adjusted to comply with the regulations of the applicable country. For a Custom antenna, Antenna Gain is entered manually. Note the requirements and antenna types listed below.

Certified Antenna Types

This radio transmitter FCC ID: SWX-UAPOUTDOOR / IC ID: 6545A-UAPOUTDOOR has been approved by FCC /ISED Canada to operate with the antenna types listed below with the maximum permissible gain for each antenna type indicated. Antenna types not included in this list or having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.

Antenna	Frequency	Gain
2 Omni	2.4 GHz	5 dBi

Specifications

UAP-Outdoor+
Dimensions	205 x 83 x 37 mm (8.07 x 3.27 x 1.46")
Weight	250 g (8.82 oz) without Antennas 294 g (10.37 oz) with Antennas
Networking Interface	(2) 10/100 Ethernet Ports
Buttons	Reset
Power Method	48V Passive Power over Ethernet/ 802.3af Supported
Power Supply	48V, 0.5A PoE Adapter (Included)
Supported Voltage Range	44VDC to 57VDC
Power Save	Supported
Max. Power Consumption	8W
Max. TX Power	28 dBm
Antennas	(2) External Omni Antennas
Antenna Gain	5 dBi
Wi-Fi Standards	802.11 b/g/n (2.4 GHz)
Wireless Security	WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
BSSID	Up to Four per Radio
Mounting	Wall/Pole (Kits Included)
Operating Temperature	-30 to 65° C (-22 to 149° F)
Operating Humidity	5 - 95% Noncondensing
Certifications	CE, FCC, IC