×

Click for
Table of Contents

menuUAP-AC Quick Start Guide

Package Contents

UniFi AP AC
Mounting Bracket
Ceiling Backing Plate
Flat Head Screws (M3x50, Qty. 4)
Keps Nuts (M3, Qty. 4)
Screws (M2.9x20, Qty. 4)
Screw Anchors (M3x20, Qty. 4)
Gigabit PoE Adapter (48V, 0.5A)
Power Cord

Installation Requirements

System Requirements

Hardware Overview

LED

Ports

Main Port

The Main port is a Gigabit Ethernet port used to connect the power and should be connected to the LAN and DHCP server.

Secondary Port

The Secondary port is a Gigabit Ethernet port used for bridging.

Reset Button

The Reset button serves two functions for the UniFi AP:

  • Restart Press and release the Reset button quickly.
  • Restore to Factory Default Settings Press and hold the Reset button for more then five seconds.

Mounting Bracket

This bracket is used for wall or ceiling mounting.

Cable Feed Plug

If your Ethernet cable feeds along the mounting surface, remove the Cable Feed Plug.

Locking Clip

During installation, the Locking Clip on the Mounting Bracket locks into the Locking Notch on the UniFi AP to help prevent theft.

Hardware Installation

The UniFi AP can be mounted on the wall or ceiling. Perform the steps for the appropriate installation:

Wall Mounting

  1. Optional

  2. Optional

    Note: If the Ethernet cable feeds along the mounting surface, then remove the Cable Feed Plug on the side of the UniFi AP instead.

Ceiling Mounting

Connecting Power

OR

Specifications

UAP-AC

Dimensions

200 x 204 x 27 mm

(7.87 x 8.03 x 1.06")

Weight

508 g (1.12 lb)

With Mounting Kits566 g (1.25 lb)

Networking Interface

(2) 10/100/1000 Ethernet Ports

Buttons

Reset

Antennas

2.4 GHz3 Integrated (Supports 3x3 MIMO with Spatial Diversity)
5 GHz3 Integrated (Supports 3x3 MIMO with Spatial Diversity)

Max. TX Power

2.4 GHz23 dBm
5 GHz23 dBm

Wi-Fi Standards

802.11 a/b/g/n/ac

Power Method

48V Passive PoE or UniFi Switch

Power Supply

48V, 0.5A PoE Gigabit Adapter (Included)

Max. Power Consumption

22W

BSSID

Up to Four per Radio

Power Save

Supported

Wireless Security

WEP, WPA-PSK, WPA-TKIP, WPA2 AES, 802.11i

Certifications

CE, FCC, IC

Mounting

Wall/Ceiling (Kits Included)

Operating Temperature

-10 to 55° C (14 to 131° F)

Operating Humidity

5 to 80% Noncondensing

Certifications

CE, FCC, IC