×

Click for
Table of Contents

menuUAP-AC-M-PRO Quick Start Guide

Package Contents

UniFi AC AP Mesh Pro
Mounting Bracket
Pole Clamps (Qty. 2)
Carriage Bolts (Qty. 4)
Flange Nuts (Qty. 4)
Screws (Qty. 4)
Screw Anchors (Qty. 4)
Gigabit PoE Adapter (48V, 0.5A)*
Power Cord*

* Included only in the single-pack of the UAP-AC-M-PRO

Installation Requirements

IMPORTANT: The UAP-AC-M-PRO requires the UniFi Controller v5.4 or higher, available at: ui.com/download/unifi

System Requirements

Wireless Adoption Requirements

The UAP-AC-M-PRO supports wireless adoption into your UniFi Wi-Fi network. This feature requires a currently managed UniFi AP operating with the following configuration:

Hardware Overview

LED

Ports

Secondary

The Secondary port is a Gigabit Ethernet port used for bridging.

Reset

The Reset button serves two functions for the UniFi AP:

  • Restart Press and release the Reset button quickly.
  • Restore to Factory Default Settings Press and hold the Reset button for more than five seconds.

Main

The Main port is a Gigabit PoE port used to connect the power and should be connected to the LAN and DHCP server. Power can be provided by one of the following:

  • Gigabit PoE Adapter (included)
  • Ubiquiti UniFi Switch with PoE
  • 802.3af/802.3at PoE+ compliant switch

Hardware Installation

The UAP-AC-M-PRO can be mounted on a pole or mast, or on a wall. Perform the steps for the appropriate installation.

Pole Mount

Wall Mount

Note: Secure the Mounting Bracket directly to a stud or other structurally stable surface using appropriate fasteners.

  1. Note: Screws shown not included.

Connecting Ethernet

Connecting Power

OR

Optional

Wireless Adoption

See “Wireless Adoption Requirements” before proceeding.

  1. Ensure the UAP-AC-M-PRO is powered on, and then launch the UniFi Controller software.
  2. Go to the Devices page, and the UAP-AC-M-PRO will show up as Pending Approval (Wireless).
  3. Click Adopt.

For information on configuring and using the UniFi Controller software, refer to the User Guide located on our website: ui.com/download/unifi

Specifications

UAP-AC-M-PRO

Dimensions

343.2 x 181.2 x 60.2 mm

(13.51 x 7.13 x 2.37")

Weight

633 g (1.40 lb)

Networking Interface

(2) 10/100/1000 Ethernet Ports

Buttons

Reset

Power Method

802.3af PoE

Power Supply

48V, 0.5A PoE Gigabit Adapter (Included)

Supported Voltage Range

44VDC to 57VDC

Max. Power Consumption

9W

Operating Frequency

2.4 GHz

5 GHz

Max. TX Power

  • 2.4 GHz
  • 5 GHz
  • 22 dBm
  • 22 dBm

MIMO

  • 2.4 GHz
  • 5 GHz
  • 3 x 3
  • 3 x 3

Antennas

(3) Dual-Band Internal

Antenna Gain

8 dBi

Wi-Fi Standards

802.11 a/b/g/n/ac

Wireless Security

WEP, WPA-PSK, WPA
Enterprise (WPA/WPA2, TKIP/AES)

BSSID

Up to Four per Radio

Mounting

Wall/Pole (Pole Kit Included)

Operating Temperature

-40 to 70° C (-40 to 158° F)

Operating Humidity

5 - 95% Noncondensing

Certifications

CE, FCC, IC