×

Click for
Table of Contents

menuUAP-AC-LR Quick Start Guide

Package Contents

UniFi AP AC LR
Mounting Bracket
Ceiling Backing Plate
Flat Head Screws (Qty. 4)
Keps Nuts (Qty. 4)
Screws (Qty. 4)
Screw Anchors (Qty. 4)
Gigabit PoE* (24V, 0.5A) with Mounting Bracket
Power Cord*

* Included only in the single-pack of the UAP-AC-LR.

Installation Requirements

IMPORTANT: The UAP-AC-LR requires the UniFi Controller v4.7 or higher, available at: ui.com/download/unifi

System Requirements

Hardware Overview

LED

Ports

Locking Notch

The Locking Notch will be used with the Mounting Bracket to help secure the UniFi AP. (This is described further in the Mounting Bracket section.)

Ethernet

This Gigabit Ethernet port is used to connect the power and should be connected to the LAN and DHCP server. Power can be provided by a UniFi Switch with PoE or Gigabit PoE adapter (included with single-pack only).

Reset

The Reset button serves two functions for the UniFi AP:

  • Restart Press and release the Reset button quickly.
  • Restore to Factory Default Settings Press and hold the Reset button for more than five seconds.

Cable Feed Plug

If your Ethernet cable feeds along the mounting surface, remove the Cable Feed Plug.

Mounting Bracket

Locking Tab

During installation, the Locking Tab on the Mounting Bracket moves from the Initial Position to the Final Position, where the Locking Tab fits securely into the Locking Notch on the UniFi AP to help prevent theft.

Initial Position

Final Position

Note: If you need to remove the UniFi AP from the Mounting Bracket, insert a paper clip in the Slot to release the Locking Tab and turn the UniFi AP counterclockwise.

Hardware Installation

The device can be mounted on the wall or ceiling. Perform the steps for the appropriate installation.

Wall Mount

  1. Optional

  2. Optional

Ceiling Mount

Powering the UniFi AP

Use a UniFi Switch with PoE or a Gigabit PoE adapter for power.

Connecting to a UniFi Switch with PoE

Connect the Ethernet cable from the UniFi AP directly to a PoE port on the UniFi Switch with PoE.

UniFi Switch with PoE Power Connection Diagram

Specifications

UAP-AC-LR

Dimensions

175.7 x 175.7 x 43.2 mm
(6.92 x 6.92 x 1.70")

Weight

  • With Mounting Kits

240 g (8.5 oz)

  • 315 g (11.1 oz)

Networking Interface

(1) 10/100/1000 Ethernet Port

Buttons

Reset

Power Method

Passive PoE (Pairs 4, 5+; 7, 8 Return)

Power Supply

24V, 0.5A PoE Gigabit Adapter1

Max. Power Consumption

6.5W

Max. TX Power

  • 2.4 GHz
  • 5 GHz
  • 24 dBm
  • 22 dBm

MIMO

  • 2.4 GHz
  • 5 GHz
  • 3 x 3
  • 2 x 2

Throughput Speeds2

  • 2.4 GHz
  • 5 GHz
  • 450 Mbps
  • 867 Mbps

Range2

183 m (600 ft)

Antennas

(1) Dual-Band Antenna, Tri-Polarity

Antenna Gain

2.4 GHz: 3 dBi, 5 GHz: 3 dBi

Wi-Fi Standards

802.11 a/b/g/n/ac

Wireless Security

WEP, WPA-PSK,
WPA-Enterprise (WPA/WPA2, TKIP/AES)

BSSID

Up to Four per Radio

Mounting

Wall/Ceiling (Kits Included)

Operating Temperature

-10 to 70° C (14 to 158° F)

Operating Humidity

5 - 95% Noncondensing

Certifications

CE, FCC, IC

1. Only the single-pack of the UAP-AC-LR includes a PoE adapter.
2. Speed and Range values may vary and are based on optimal environments.

Operating Frequency (MHz)

US/CA

2400 - 2483.5

U-NII-1

5150 - 5250

U-NII-2A

5250 - 5350

U-NII-2C

5470 - 5725

U-NII-3

5725 - 5850

Worldwide

2400 - 2483.5
5150 - 5875