Package Contents

* Included only in the single-pack of the UAP-AC-EDU.

Installation Requirements

• Phillips screwdriver
• Drill and drill bit (6 mm for wall-mounting or 3 mm for ceiling-mounting)
• Optional: Drywall or keyhole saw (to cut 18 mm hole for Ethernet cable feed)
• Cat5/6 UTP cable for indoor installations

System Requirements

• Linux, Mac OS X, or Microsoft Windows 7/8/10
• Java Runtime Environment 1.8 or above recommended
• Web Browser: Google Chrome (Other browsers may have limited functionality.)
• UniFi Network Application v5.4 or newer (available at: ui.com/download/unifi)

Hardware Overview

LED

UniFi AP Ports

 

Secondary
Reserved for future use.
Reset
The Reset button serves two functions for the UniFi AP: Restart Press and release the Reset button quickly. Restore to Factory Default Settings Press and hold the Reset button for more than five seconds. Note: You must remove the UniFi AP from the Speaker Assembly before you can access the Reset button.
Cable Feed Opening
The USB and Ethernet cables feed through this opening.
USB
The USB 2.0 port is used to support the Speaker Assembly.
Main
This Gigabit Ethernet port is used to carry power and data.

Back of the Speaker Assembly

Main Port
This Gigabit Ethernet port is used to connect the power and should be connected to the LAN and DHCP server.
Clamp Bracket
The four Clamp Brackets are used to secure the UniFi AP AC EDU to the ceiling tile.

Hardware Installation

1. 

2. 

3. 

4. 

5. 

6. We strongly recommend that you attach the Safety Wire (length: 430 mm) to a secure structural point using its clasp (inside diameter: 14 mm). Do NOT attach the Safety Wire to a T-bar in the ceiling grid.

	Note: It is the installer’s responsibility to verify that installation complies with local construction and safety codes.

Two examples are shown below.

7. 

8. 

9. 

10. 

11. 

Connecting Power

OR

	Note: The Gigabit PoE adapter is included only in the single-pack of the UAP-AC-EDU.

UniFi EDU App

Ubiquiti Networks offers the UniFi EDU app so you can broadcast announcements with clarity from your mobile device.

1.  





2. Follow the on-screen instructions.

The UniFi EDU app includes five tabs:

• Broadcast Create broadcast groups and make an immediate announcement.
• Schedule Schedule announcements.
• Recordings Create recordings for later use.
• Volume Adjust the volume for each UniFi AP AC EDU.
• Settings Switch to a different site.

	Note: For details, refer to the User Guide, which is available at: ui.com/download/unifi

Specifications

UAP-AC-EDU
Dimensions	287.5 x 287.5 x 125.9 mm (11.32 x 11.32 x 4.96")
Weight	1.820 kg (4.012 lb)
Networking Interface	(2) 10/100/1000 Ethernet Ports
Port	(1) USB Port
Buttons	Reset
Power Method	802.3at PoE+
Power Supply	48V, 0.5A PoE Gigabit Adapter1
Supported Voltage Range	44VDC to 57VDC
Max. Power Consumption	20W
Operating Frequency	2.4 GHz 5 GHz
Max. TX Power
2.4 GHz	22 dBm
5 GHz	22 dBm
MIMO
2.4 GHz	3 x 3
5 GHz	3 x 3
Throughput Speeds2
2.4 GHz	450 Mbps
5 GHz	1300 Mbps
Range2	122 m (400 ft)
Antennas	(3) Dual-Band Internal
Antenna Gain	2.4 GHz: 3 dBi, 5 GHz: 3 dBi
Wi-Fi Standards	802.11 a/b/g/n/ac
Wireless Security	WEP, WPA-PSK, WPA Enterprise (WPA/WPA2, TKIP/AES)
BSSID	Up to Four per Radio
Mounting	Wall/Ceiling (Kits Included)
Operating Temperature	-10 to 70° C (14 to 158° F)
Operating Humidity	5 - 95% Noncondensing
Certifications	CE, FCC, IC

1Only the single-pack of the UAP-AC-EDU includes a PoE adapter.
2Speed and Range values may vary and are based on optimal environments.