Package Contents
Dish Reflector |
Antenna Feed |
Mount Bracket |
Protective Shroud |
Pole Clamps (Qty. 2) |
Stabilizer Brackets (Qty. 2) |
RF Cables (Qty. 2) |
Elevation Rod |
M10x150 Carriage Bolts (Qty. 4) |
M10x100 Bolts (Qty. 2) |
M10x25 Carriage Bolts (Qty. 3) |
M4 Screws (Qty. 4) |
Installation Requirements
- 5 GHz Rocket® radio (sold separately)
- Phillips #1 screwdriver
- 16 mm or 5/8" wrench
- 24 mm wrench
- Shielded Category 5 (or above) cabling with drain wire should be used for all wired Ethernet connections and should be grounded through the AC ground of the PoE.
We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For more details, visit ui.com/toughcable
Hardware Installation
IMPORTANT: Handle the Dish Reflector with care. Deformations in its shape may reduce the antenna’s effectiveness. |
IMPORTANT: The Dish Reflector and Antenna Feed are keyed so the Antenna Feed can only be installed in a single orientation. |
IMPORTANT: Do not handle the antenna by the Antenna Feed once the feed is connected. |
Specifications
RocketDish RD-5G30 |
|
Dimensions |
650 x 650 x 304 mm (25.59 x 25.59 x 11.97") |
---|---|
Weight |
9.8 kg (21.61 lb) |
Frequency |
5.1 - 5.9 GHz |
Gain |
30 dBi |
HPOL Beamwidth |
5° (3 dB) |
VPOL Beamwidth |
5° (3 dB) |
Front-to-Back Ratio |
-34 dB |
Max. VSWR |
1.7:1 |
Wind Survivability |
200 km/h (125 mph) |
Wind Loading |
787 N @ 200 km/h (177 lbf @ 125 mph) |
Polarization |
Dual Linear |
Cross-Pol Isolation |
35 dB Min. |
Mounting |
Universal Pole Mount, Rocket Bracket, and Weatherproof RF Jumpers Included |