Package Contents
 |
|---|
| Rocket5ac PtMP |
 |
|---|
| Gigabit PoE Adapter (24V, 0.5A) |
 |
|---|
| Power Cord |
Installation Requirements
- Shielded Category 5 (or above) cabling should be used for all wired Ethernet connections and should be grounded through the AC ground of the PoE.
We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For more details, visit ui.com/toughcable
Hardware Overview
RP-SMA Antenna Connectors |
|---|
Used to attach RF cables (not included). |
LEDs |
Signal In airOS®, you can modify the wireless signal strength threshold values for each LED on the Wireless tab under Signal LED Thresholds. Each LED will light when the wireless signal strength is equal to or greater than the LED’s threshold value. The default values are shown below:
LAN The LAN LED will light steady blue when an active Ethernet connection is made to the LAN port and flash when there is activity. Power The Power LED will light blue when the device is connected to a power source. |
 Additional LEDs |
Reserved for future use. |
 Reset Button |
To reset to factory defaults, press and hold the Reset button for more than 10 seconds while the device is already powered on. Alternatively, the device may be reset remotely via a Reset button located on the bottom of the Gigabit PoE adapter. |
LAN/PoE |
The Gigabit Ethernet port is used to connect the power and should be connected to the LAN and DHCP server. |
Hardware Installation
The Rocket5ac PtMP is designed to mount directly onto a Ubiquiti airMAX Sector Antenna.
Connecting Power
|
|
WARNING: The switch port must comply with the power specifications listed in this Quick Start Guide. |
|---|
OR
Accessing airOS
Installer Compliance Responsibility
Devices must be professionally installed and it is the professional installer's responsibility to make sure the device is operated within local country regulatory requirements.
Antenna
Select your antenna from the list. If Calculate EIRP Limit is enabled, transmit output power is automatically adjusted to comply with the regulations of the applicable country. For a Custom antenna, Antenna Gain is entered manually. Note the requirements and antenna types listed below.
Cable Loss (When applicable)
Enter the cable loss in dB. Output power is adjusted to compensate for loss between the radio and the antenna.
This radio transmitter FCC ID: SWX-R5ACPTMP / IC: 6545A-R5ACPTMP has been approved by FCC / ISED Canada to operate with the antenna types listed below with the maximum permissible gain for each antenna type indicated. Antenna types not included in this list or having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
Certified Antenna Types
|
Antenna |
Frequency |
Gain |
|---|---|---|
|
Omni |
5 GHz |
13 dBi |
|
Sector |
5 GHz |
22 dBi |
|
Dish |
5 GHz |
34 dBi |
Specifications
|
Rocket5ac PtMP |
|
|
Dimensions |
198.5 x 86.4 x 44.1 mm (7.82 x 3.40 x 1.74") |
|---|---|
|
Weight |
295 g (10.41 oz) |
|
Operating Frequency |
Worldwide: 5470 - 5875 MHz |
|
Networking Interface |
(1) 10/100/1000 Ethernet Port |
|
RF Connectors |
(2) RP-SMA (Waterproof) |
|
LEDs |
Power, LAN, (4) Signal Strength, (5) Reserved |
|
Enclosure |
Outdoor UV Stabilized Plastic |
|
Max. Power Consumption |
8.5W |
|
Power Supply |
24V, 0.5A Gigabit PoE Adapter (Included) |
|
Power Method |
Passive PoE (Pairs 4, 5+; 7, 8 Return) |
|
Operating Temperature |
-40 to 80° C (-40 to 176° F) |
|
Operating Humidity |
5 to 95% Noncondensing |
|
ESD/EMP Protection |
± 24KV Contact / Air for Ethernet |
|
Shock and Vibrations |
ETSI300-019-1.4 |
|
Certifications |
CE, FCC, IC |
|
Operating Frequency (MHz) |
||
|
Worldwide |
5150 - 5875 |
|
|---|---|---|
|
US/CA |
U-NII-2C: |
5470 - 5725 |
|
U-NII-3: |
5725 - 5850 |
|