×

Click for
Table of Contents

menuER-6P Quick Start Guide

Package Contents

EdgeRouter ER-6P
Wall Mount Screws (Qty. 2)
Wall Mount Anchors (Qty. 2)
Ground Screw
Power Cord
Power Adapter (24V, 2.5A)
Cable Clip

Installation Requirements

WARNING: To reduce the risk of fire or electric shock, do not expose the EdgeRouter to rain or moisture.

Note: Although the cabling can be located outdoors, the EdgeRouter itself should be housed inside a protective enclosure.

Hardware Overview

Note: The System LED functionality has been updated with firmware v1.10.7. We recommend that you update the EdgeRouter to the latest firmware.

System LED

Flashing White

Bootup in progress.

White

Ready for use, not connected to Ubiquiti Internet Service Provider (UISP™).

Blue

Ready for use, connected to UISP.

Steady Blue with Occasional Flashing

Ready for use, unable to connect to UISP, check connection to UISP server.

Quickly Flashing Blue

Used to locate a device in UISP.

Alternating Blue/White

Firmware upgrade in progress.

RJ45 PoE LED (0 - 4)

Off

No PoE

Green

24V 2-Pair Passive PoE Output

Blue

24V 4-Pair Passive PoE Output

RJ45 Speed/Link/Act LED (0 - 4)

Off

No Link

Amber

Link Established at 10/100 Mbps

Amber Flashing

Link Activity at 10/100 Mbps

Green

Link Established at 1000 Mbps (1 Gbps)

Green Flashing

Link Activity at 1000 Mbps (1 Gbps)

SFP Link/Act LED (5)

Off

No Link

Green

Link Established at 1 Gbps

Green Flashing

Link Activity at 1 Gbps

Console

RJ45 serial console port for Command Line Interface (CLI) management.

USB

Reserved for future use.

RJ45 Ports (eth0 - eth4)

RJ45 ports support 10/100/1000 Ethernet connections.

SFP Port (eth5)

SFP port is hot-swappable and supports Gigabit fiber SFP modules.

Reset Button

Click here to learn how to reset an EdgeRouter to factory defaults.

Hardware Installation

WARNING: FAILURE TO PROVIDE PROPER VENTILATION MAY CAUSE FIRE HAZARD. KEEP AT LEAST 20 MM OF CLEARANCE NEXT TO THE VENTILATION HOLES FOR ADEQUATE AIRFLOW.

Wall Mounting

Grounding the EdgeRouter (Recommended)

The Power Adapter grounds the device; however, you can add optional ESD grounding for enhanced ESD protection.

  1. Attach the Ground Screw to secure a ground wire (not included) to the Grounding Point.

  2. Optional: To secure the Power Adapter cord, insert it into the Cable Clip and secure the Cable Clip using the Ground Screw.
  3. Secure the other end of the ground wire to a grounding block.

Connecting Power

Using SFP Ports

For information about compatible fiber SFP modules, visit: ubnt.link/SFP_DAC_Compatibility

Accessing the EdgeOS Configuration Interface

The EdgeOS® configuration interface can be accessed via DHCP or static IP address assignment. By default, eth1 is set up as a DHCP client, while eth0 is assigned a static IP address of 192.168.1.1. To configure the EdgeRouter, proceed to the appropriate section: DHCP or “Static IP Address”.

DHCP

  1. Connect an Ethernet cable from eth1 on the EdgeRouter to a LAN segment that has an existing DHCP server.

  2. To check the IP address of the EdgeRouter, use one of the following methods:
    • Set up the DHCP server to provide a specific IP address to the EdgeRouter based on its MAC address (on the label).
    • Let the EdgeRouter obtain an IP address and then check the DHCP server to see which IP address was assigned.
  3. Launch your web browser. Enter the appropriate IP address in the address field. Press enter (PC) or return (Mac).
  4. Enter ubnt in the Username and Password fields. Read the Ubiquiti License Agreement, and check the box next to I agree to the terms of this License Agreement to accept it. Click Login.

The EdgeOS Configuration Interface will appear, allowing you to customize your settings as needed. For more information, refer to the EdgeOS User Guide, which is available at ui.com/download/edgemax

For more information on PoE configuration, refer to “Configuring PoE Settings”.

Static IP Address

  1. Connect an Ethernet cable from the Ethernet port on your computer to the port labeled eth0 on the EdgeRouter.

  2. Configure the Ethernet adapter on your host system with a static IP address on the 192.168.1.x subnet.
  3. Launch your web browser. Type https://192.168.1.1 in the address field. Press enter (PC) or return (Mac).
  4. Enter ubnt in the Username and Password fields. Read the Ubiquiti License Agreement, and check the box next to I agree to the terms of this License Agreement to accept it. Click Login.

The EdgeOS Configuration Interface will appear, allowing you to customize your settings as needed. For more information, refer to the EdgeOS User Guide, which is available at ui.com/download/edgemax

For more information on PoE configuration, refer to “Configuring PoE Settings”.

UISP Management

You can manage your device using UISP, which lets you configure, monitor, upgrade, and back up your devices using a single application. Get started at uisp.ui.com

Configuring PoE Settings

The PoE setting for ports eth0-eth4 is set to Off by default.

WARNING: Before activating PoE, ensure that the connected device supports passive PoE and the supplied voltage.

  1. In the Dashboard tab, click Actions > PoE of the Ethernet port you want to configure.
  2. Select the appropriate PoE setting, and click Save.
  3. The Ethernet port’s PoE LED will confirm the PoE setting.

Specifications

ER-6P

Dimensions

229 x 136.5 x 31.1 mm
(9.02 x 5.37 x 1.22")

Weight

730 g (1.61 lb)

Max. Power Consumption

16W (Excludes PoE Output)

Power Method

External AC/DC Power Adapter, 60W (24V, 2.5A) (Included)

Power Supply

External AC/DC Adapter

Passive PoE

 
Configurations Off/24V 2-Pair/24V 4-Pair
Voltage Range 24V
Max. Power per Port 12W

Supported Voltage Range

100-240VAC, 50/60 Hz Universal Adapter
30-16V

Button

Reset

LEDs

 
Data Ports Speed/Link/Activity, PoE
SFP Data Port Link/Activity

Processor

4-Core 1 GHz MIPS64

System Memory

1 GB DDR3 RAM

On-Board Flash Storage

4 GB eMMC, 8 MB SPI NOR

ESD/EMP Protection

Air: ± 24 kV, Contact: ± 24 kV

Interfaces

 
Management (1) RJ45 Serial Port
(6) Ethernet Ports (Default eth0)
Networking (5) 10/100/1000 RJ45 Ports with PoE
(1) 1 Gbps SFP Port

Operating Temperature

-10 to 50° C (14 to 122° F)

Operating Humidity

10 - 90% Noncondensing

Certifications

CE, FCC, IC

PoE with 24VDC Power Adapter

PoE Interfaces

(5) 24V Passive PoE Ports, 2-pair (4, 5+; 7, 8-) and 4-pair

Passive PoE Max. Wattage Per Port

24W (24V, 1A, 4-pair)
12W (24V, 0.5A, 2-pair)

Passive PoE Voltage Range

24V