×

Click for
Table of Contents

menuBM2-Ti Quick Start Guide

Package Contents

Bullet Titanium
N-Type Right Angle Adapter
PoE Adapter (24V, 0.5A)
Power Cord

Hardware Overview

Reset Button

To reset to factory defaults, press and hold the Reset button for more than 10 seconds while the device is powered on.

Ethernet Port

This 10/100 Ethernet port is used to connect the power and should be connected to the LAN and DHCP server.

Hardware Installation

Note: The Bullet Titanium should be mounted vertically to reduce stress on the N-Type Connector. The N-Type Right Angle Adapter may be used as needed.

Connecting Power

WARNING: The switch port must comply with the power specifications listed in the “Specifications”.

OR

Accessing airOS

Installer Compliance Responsibility

Devices must be professionally installed and it is the professional installer’s responsibility to make sure the device is operated within local country regulatory requirements.

Antenna

Select your antenna from the list. If Calculate EIRP Limit is enabled, transmit output power is automatically adjusted to comply with the regulations of the applicable country. For a Custom antenna, Antenna Gain is entered manually. Note the requirements and antenna types listed below.

Cable Loss (When applicable)

Enter the cable loss in dB. Output power is adjusted to compensate for loss between the radio and the antenna.

Certified Antenna Types

This radio transmitter FCC ID: SWX-M2BW / IC: 6545A-M2BW has been approved by FCC /ISED Canada to operate with the antenna types listed below with the maximum permissible gain for each antenna type indicated. Antenna types not included in this list or having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.

Antenna

Frequency

Gain

Omni

2.4 GHz

13 dBi

Sector

2.4 GHz

17 dBi

Dish

2.4 GHz

24 dBi

Specifications

BM2-Ti

Dimensions

190 x 46 mm (7.72 x 1.81")

Weight

196 g (6.91 oz)

Enclosure

Powder Coated Aluminum

Processor

MIPS 74KC

Memory

DDR2 64MB

Networking Interface

(1) 10/100 Ethernet Port

Antenna Connector

N-Type Connector

Max. Power Consumption

7 W

Max. TX Power

25 dBm

Power Supply

24V, 0.5A Gigabit PoE Adapter (Included)

Power Method

24V Passive PoE (Pairs 4, 5+; 7, 8-)

Shock and Vibration

ETSI300-019-1.4

Operating Temperature

-40 to 70° C

(-40 to 158° F)

Operating Humidity

5 to 95% Noncondensing

Certifications

CE, FCC, IC

Operating Frequency (MHz)

Worldwide

2412 - 2472

US/CA

2412 - 2462