Package Contents

Installation Requirements

• Rocket®M2 Titanium or RocketM2 (sold separately)
• 12 mm and 13 mm wrenches
• Shielded Category 5 (or above) cabling should be used for all wired Ethernet connections and should be grounded through the AC ground of the PoE.

  We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For more details, visit ui.com/toughcable

Before You Begin

1. Loosen the four hex head screws, but do not remove the screws.



2. Carefully move the Beamwidth Deflectors to the desired angle, as indicated by the screw slots.



120° Beamwidth



90° Beamwidth



60° Beamwidth

	Important: Both deflectors must be set to the same angle.

3. Tighten the four hex head screws.

Hardware Installation

1. 

2. 

3. 

4. 

5. 

	Note: Orient both U-Brackets as shown.

6. 

7. 

	Note: Hand-tighten the bolts.

8. 

9. 

	Note: The antenna has an electrical downtilt of 4°.

10. 

	Note: The brackets may slide along the pole, depending on the angle of the elevation tilt.

11. 

Specifications

AM-V2G-Ti
Dimensions	773 x 372 x 120 mm (30.43 x 14.65 x 4.72")
Weight (with Brackets)	6.40 kg (14.11 lb)
Frequency Range	2.3-2.6 GHz
Beamwidth Angles	60°/ 90°/ 120°
Gain (Beamwidth Dependent)	17 dBi @ 60° 16 dBi @ 90° 15 dBi @ 120°
Electrical Downtilt	4°
Wind Survivability	200 km/h (125 mph)
Wind Loading	640.5 N@ 200 km/h (144 lbf @ 125 mph)
Polarization	Dual Linear
Cross-Pol Isolation	25 dB Typical
F/B Ratio	30 dB Typical
Max. VSWR	1.5:1
RF Connectors	2 RP-SMA Connectors (Weatherproof)
Compatible Radios	RocketM2 Titanium RocketM2
Mounting	Pole Mount (Kit Included)
ETSI Specification	EN 302 326 DN2
Certifications	CE, FCC, IC