AirOS7 Firmware Revision History ==================================================================== Supported products * Rocket 5AC Lite, model: R5AC-Lite * Rocket 5AC PTP AirPrism, model: R5AC-PTP * Rocket 5AC Multi-Point AirPrism, model: R5AC-PTMP * PowerBeam 5AC, models: PBE-5AC-500, PBE-5AC-620, PBE-5AC-300, PBE-5AC-400 * PowerBeam 5AC 300 ISO, model: PBE-5AC-300-ISO * PowerBeam 5AC 400 ISO, model: PBE-5AC-400-ISO * PowerBeam 5AC 500 ISO, model: PBE-5AC-500-ISO * NanoBeam 5AC 19dBi, model: NBE-5AC-19 * NanoBeam 5AC 16dBi, model: NBE-5AC-16 * LiteBeam 5AC 23dBi, model: LBE-5AC-23 * Rocket 5AC Prism, model: R5-AC-PRISM ==================================================================== Version 7.2.3 (XC, WA) - Service Release (July 1, 2016) -------------------------------------------------------------------- Regulatory updates: - Improved DFS detection for UK Version 7.2.2 (XC, WA) - Service Release (May 27, 2016) -------------------------------------------------------------------- New: - New: Security enhancements - New: Disable custom scripts usage - New: lighttpd update to v1.4.39 - New: Activation of revised UNII band for PowerBeam 5AC 620 Fixes: - Fix: TX power improvements for WA series products - Fix: Security updates and improvements (malware scripts check, removal and restrictions) - WEB UI: Fixed Station List sorting by TX/RX PPS and TX Rates - WEB UI: Improved page rendering on IE, Firefox, Chrome Version 7.2 (XC, WA) - Final Release (February 11, 2016) -------------------------------------------------------------------- New: - New: Revised UNII Rules activation - New: Improved 30 MHz* and 60 MHz* channel widths (replace 30 MHz and 60 MHz channel widths) - New: Option to enable/disable Flow Control - New: GPS coordinates reporting for Rocket 5AC PRISM in Dashboard page - New: Save kernel crashlog and include it in Support info archive (for better troubleshooting) - New: Linux kernel upgrade to v2.6.32.68 Regulatory updates: - Update frequency list for China: 5150-5350MHz (23dBm), DFS: 5250-5350MHz + 5725-5850MHz (33dBm) Improvements: - airMAX protocol security improvements - Improved Antenna Align Tool - Improved Site Survey scan Fixes: - Fix: 5.8GHz band (EN 302 502) isn't allowed in France - Fix: airMAX AC PTMP noisy network AP->STA direction packet loss - Fix: Reduced DFS false positive events - Fix: Reduced connection time in PTMP mode - Fix: Wireless connectivity failure on channel change - Fix: Multicast packet loss in PTMP mode - Fix: Device hang during configuration change when DHCP relay is enabled on two LAN interfaces - Fix: Incorrect security type reporting on Station after configuration changes - Fix: Allow DHCP start/end range to match to provide only single IP - Fix: UBNT stations name reporting in SNMP - Fix: 1000Mbps negotiation issue when connected to CISCO 2950t switch up-link gigabit ports - Fix: Incorrect NTP functionality when changing Time Zone - Fix: Speed Test tool no results reporting - Fix: Impossible to disable DNS proxy - Fix: On first scan Site Survey doesn't scan full frequency range - Fix: SSH client can't connect to RouterOS device - Fix: Fixed incorrect placement of the "!" iptables (router mode) - Fix: Don't allow to remove WLAN0 item from BRIDGE0 (configuration restriction to avoid low performance) - Fix: Other small changes to improve airOS stability and add additional debugging information Version 7.1.4 (XC, WA) - Service Release (September 11, 2015) -------------------------------------------------------------------- Important: - Upgrade is allowed from v7.1-rc (and later) airOS version. New product support: - New: Rocket 5AC Prism (XC) - New: PowerBeam 5AC 300 ISO (WA) - New: PowerBeam 5AC 400 ISO (WA) New: - New: Graphical Site Survey view - New: Forced password change in WEB UI before apply changes - New: Ethernet advertised speed selection when auto-negotiation is enabled - New: Frequency selection in 5MHz step for all countries - New: Enabled 5.8GHz band EN 302.502 (5725 MHz - 5875 MHz) for EU - New: Upgrade Kernel to 2.6.32.65 - New: AC2 support Fixes: - Fix: Disconnects on wpa2-eap re-authentication - Fix: STA Channel pickup issue in VHT80 mode - Fix: DFS does not start CAC timer on channel which has passed all DFS procedure before - Fix: Station operating in PTMP mode can't associate to AP - Fix: Output power gets decreased when setting Antenna Gain greater than MAX Output Power - Fix: 802.11n AP with same SSID as airMAX AC AP can lock up Station association - Fix: Apply Frequency List configuration with fast restart - Fix: Multicast traffic in PTMP flows with lowest rates (as broadcasts) - Fix: SNMP reports old device name after changing it - Fix: Isolated Capacity is not available via SNMP (MIB update required) - Fix: Reset button on PoE adapter does not work - Fix: Occasional device hangs up during configuration changes - Fix: Traffic shaper doesn't filter VLAN tagged ingress traffic - Fix: Radio hangs up after output power change when doing fast restart - Fix: Port forward changes cause high CPU usage - Fix: Increase scan timeout - Fix: Throughput degradation after some time - Fix: On a PTMP AP RX airtime was incorrect - Fix: Station PTMP stops passing data (Station kick is required from AP side) - Fix: Station fails to reconnect to AP after was disconnected - Fix: Station shall send EVM report only when polled by AP - Fix: AP PTMP crash while setting TDMA parameters - Fix: PTMP download throughput is slow in large network - Fix: Unexpected Staton disconnects - Fix: Reduce bursts of remote stats. Reduce CPU usage on AP - Fix: Prevent airView radio from crashing when stations disassociate - Fix: RADIUS accounting doesn't report transferred data counters - Fix: Station can't connect after AP scan - Fix: After many channel changes radio crash - Fix: Use model for shortName in discovery packets to make it unique - Fix: Sometimes station can't connect to AP - Fix: EIRP limit calculation is wrong when Frequency List is enabled on AP - Fix: Update Pakistan regulatory. Max EIRP 20dBm(100mW) for 5GHz - Fix: Buffer overflow in PHP2 - Fix: MTU error when switching to advanced mode - Fix: Port forwarding does not work w/ PPPoE Client for WAN - Fix: Improve wait message on ambient noise graph - Fix: Main tab view issue after change STA-PTMP / AP-PTMP - Fix: DHCP server range validation issue - Fix: Remote Constellation Diagram power value is incorrect - Fix: Wrong channel width on Station main page when disconnected - Fix: Max power calculation does not take frequency list in count - Fix: Improved airOS auto update check - Fix: Added "7" to airOS logo - Fix: Show possible LAN interface negotiation speed for Auto option - Fix: Session authentication should include URL port for cookie identification - Fix: Site Survey during active scan keeps scrolling results page to the TOP - Fix: Speed Test tool returns invalid results initially Version 7.1.3 (XC) - Service Release (July 17, 2015) --------------------------------------------------------- Important: - Upgrade is allowed from v7.1-rc (and later) airOS version. - Fix: Vulnerability via HTTP(s) allowing remote access to unauthenticated users Version 7.1.1 (XC) - Service Release (May 19, 2015) --------------------------------------------------------- Important: - Upgrade is allowed from v7.1-rc (and later) airOS version. - New: Remove Wireless Mode (PTP/PTMP) limitations per product - Fix: Multiple priorities traffic causes high packet error rate - Fix: Frequent longer distance link disassociations on heavy traffic load - Fix: Bridge duplicates unknown unicast packets - Fix: Station sometimes doesn't reconnect to AP (PTMP operation mode) - Fix: Station can't connect to AP after it's DFS wait period end - Fix: Improved DFS false positive detection - Fix: TX/RX signals are very low just after association - Fix: Speed Test tool timeout issue - Fix: CPU load increase to 100% after high throughput load - Fix: Multicast stream can pass through one client only - Fix: AP ignores EAP Session-Timeout attribute - Fix: DHCP Client gets new IP after each release time - Fix: Faster PPPoE/DHCPC IP settings update after association when WPA2 security is used - Fix: Update EIRP limits for Brasil - Fix: Show DFS events in Syslog - Fix: WLAN TX errors counting - Fix: Include ICMP ping request (ICMP type 8) to DMZ Management port exception list - Fix: NTP client is restarting when server is unreachable - Fix: Disabling VLAN leaves associated ebtables rules enabled (may cause certain VLAN tagged traffic to not pass link) - Fix: Reduced CPU usage - Fix: Dynamic traffic shaping burst limits - Fix: Disable iptables when changing network role from Router to Bridge - Fix: IPv6 connectivity delay - Fix: Station stops passing traffic after some time - Fix: Aggregation parameters doesn't change after apply - Fix: Increase TEST mode wait time according DFS wait time period - Fix: Active channel width is not reported for STA mode after association to AP - Fix: Do full restart when configuring Frequency List - Fix: DNS servers disappear after fast restart (PPPoE/DHCP Client mode) - Fix: Disable IPv6 neighbour discovery - Fix: Wrong channel width reported in MAIN page after Station disconnect - Fix: Wireless link disconnect/lockup issue - Fix: Auto ACK/Distance miscalculation issues - Fix: Reset button on PoE adapter doesn't trigger factory reset - WEB UI: airView vertical scrollbar issue - WEB UI: add dBm labels to signal per chain values - WEB UI: Constellation diagram optimisation for IE9 - WEB UI: Sometimes "Save" button isn't active after first mouse click - WEB UI: Show disabled Antenna Gain field for products with integrated antenna - WEB UI: Distance reporting in MAIN page - WEB UI: WPA anonymous identity should be not a mandatory option - WEB UI: Password strength meter - WEB UI: Output power reporting in Device Info section - WEB UI: Add client Isolation configuration option - WEB UI: Low Speed Test result values - WEB UI: Show Firmware Version in Stations list - WEB UI: Traffic Shaper. Interface list should not include disabled interfaces - WEB UI: Doesn't load antenna gain value from configuration file - WEB UI: Hide "Client Isolation" function for AP-PTP mode - WEB UI: Switched pairs Cable pair 2 <> Cable pair 0. Added explanations on statuses OPEN, SHORT, TEST FAILED - WEB UI: Can't edit Startup Date - WEB UI: No DHCP leases in WEB UI - WEB UI: Other small changes/improvements ==================================================================== Version 7.1-rc (XC) - Release Candidate (November 22, 2014) --------------------------------------------------------- Important: - After upgrade to v7.1-rc downgrades to v7.0.x will not be possible due to the major firmware differences New: - New: airMAX AC PTMP support - New: Completely new WEB UI design and new features: * TEST mode * airView support (runs without breaking wireless connection) * Ambient Noise diagram * Constellation diagram * CINR histogram * Ethernet cable diagnostics tool * Max Rate selection * LAN speed configuration * Traffic shaping Version 7.0.3-u1 (XC) - Service Release (October 3, 2014) --------------------------------------------------------- Fixes: - Fix: Stability issues when passing prioritised traffic - Fix: Improved performance for long distance 10MHz/30MHz channel bandwidth links - Fix: Disable Ethernet pause frames Version 7.0.3 (XC) - Production Release (August 18, 2014) --------------------------------------------------------- New: - New: AC product models support Fixes: - Fix: Traffic issues/increased latency on long distance links - Fix: After Site Survey, some statistics are gone - Fix: Unify 30MHz channel list for US/Puerto Rico and Canada Improvements: - Various stability improvements Version 7.0.2-u1 (XC) - Production Release (July 22, 2014) ---------------------------------------------------------- New: - New: AC product models support - New: Opened more channel width options (10MHz/30MHz) Improvements: - WEB UI improvements/extended statistics reporting/instant configuration changes - Quicker WPA2 connection establishment Version 7.0.1-u1 (XC)- Production Release (June 19, 2014) --------------------------------------------------------- New products support, XC product family: - New: Rocket 5AC Lite support - New: PowerBeam 5AC 500 support This FW supports PTP mode only.