TOUGHSwitch Firmware Revision History
====================================================================
Supported products

  * TOUGHSwitch PoE (5 port model)
  * TOUGHSwitch PoE PRO/Carrier (8 port model)
   
====================================================================
Version 1.3.4 (March 17, 2017)
---------------------------------------------

Security fixes:
- Command injection in Ping test tool
- Other security fixes and improvements

Version 1.3.3 (May 24, 2016)
---------------------------------------------

New: 
- New: Disable custom scripts usage 
- New: OpenSSL update to v1.0.2h 
- New: lighttpd update to v1.4.39 
- New: libevent update to v2.0.22 
- New: tinysnmp update to v0.8.5 

Fixes: 
- Fix: Security updates and improvements (malware scripts check, removal and restrictions) 

Version 1.3.2 (July 17, 2015)
---------------------------------------------

Fixes:
- Fix: Vulnerability via HTTP(s) allowing remote access to unauthenticated users

Version 1.3 (July 26, 2013)
---------------------------------------------

- New: Flow control option (per port)
- New: Trunk VLAN mode (per port)
- New: Added ability to view MAC forwarding table
- New: Native VLAN selection
- New: PoE Reboot function
- New: Default settings: Enable STP in default configuration
- New: Default settings: Trunk VLAN mode enabled in default configuration
- New: "Test Mode" for TOUGHSwitch 
- New: Check for firmware updates

Fixes:
- Fix: STP functionality improvement (STP packet loop between different VLAN)
- Fix: TOUGHSwitch PoE (5 port model) stability improvements
- Fix: Send out untagged BPDU packets
- Fix: Backup configuration upload and admin password change issue
- Fix: RX statistics doesn't count packets if packets size is more than 2000 Bytes 
- Fix: ToughSwitch doesn't work with fixed 100Mbps-Full 
- Fix: Link status indication issues
- Fix: RSTP settings were not applied after "Save Changes"
- Fix: Change Human Readable label to Formatted
- Fix: Improve Link Speed/Auto-negotiation selection
- Fix: After Disable/Enable Port status on port with no cable connected, port appears as connected 
- Fix: HTTP port change routine improvement expected - Could not change server port while https was checked
- Fix: TOUGHSwitch name with special symbols can cause javascript error 
- Fix: Latitude and Longitude validation issue
- Fix: UI freezes when "Loading data...."
- Fix: Unexpected warning after save changes in VLAN tab
- Fix: Page redirect fails after reset to defaults
- Fix: Ports sorting icon is hidden in Safari browser
- Fix: Limit Device Name to 64 symbols

Improvements:
- TOUGHSwitch MAC address changes when enabling/disabling "Management Port Only" 
- New Default "Ping Interval" value for Port PoE watchdog (15sec)
- Improved firmware update process
- Faster Alerts processing 


Version v1.2.1 (April 24, 2013)
---------------------------------------------
- New: Add support for new TOUGHSwitch PoE (5 port model) HW revision 

Version 1.2  (August 28, 2012)
----------------------------------------------
- New: Add support for new TOUGHSwitch PoE PRO HW revision 

Fixes:
- Fix: TOUGHSwitch PoE PRO: Crash when pass traffic between management and GiGE ports 

Version 1.1  (July 25, 2012)
----------------------------------------------
- New: TOUGHSwitch PoE PRO (8 port model) support


Version 1.0 (June 15, 2012)
----------------------------------------------
- New: TOUGHSwitch PoE (5 port model) support