AirOS7 Firmware Revision History
====================================================================
Supported products
  * Rocket 5AC Lite, model R5AC-Lite	
  * PowerBeam 5AC, model: PBE-5AC-500, PBE-5AC-620
  * Rocket 5AC PTP AirPrism, model: R5AC-PTP
  * Rocket 5AC Multi-Point AirPrism, model: R5AC-PTMP
  * NanoBeam 5AC 19dBi, model: NBE-5AC-19

====================================================================
Version 7.1.1 (XC) - Service Release (May 19, 2015)
---------------------------------------------------------
Important:
- Upgrade is allowed from v7.1-rc (and later) airOS version.

- New: Remove Wireless Mode (PTP/PTMP) limitations per product

- Fix: Multiple priorities traffic causes high packet error rate
- Fix: Frequent longer distance link disassociations on heavy traffic load
- Fix: Bridge duplicates unknown unicast packets
- Fix: Station sometimes doesn't reconnect to AP (PTMP operation mode)
- Fix: Station can't connect to AP after it's DFS wait period end
- Fix: Improved DFS false positive detection
- Fix: TX/RX signals are very low just after association
- Fix: Speed Test tool timeout issue
- Fix: CPU load increase to 100% after high throughput load
- Fix: Multicast stream can pass through one client only
- Fix: AP ignores EAP Session-Timeout attribute
- Fix: DHCP Client gets new IP after each release time
- Fix: Faster PPPoE/DHCPC IP settings update after association when WPA2 security is used
- Fix: Update EIRP limits for Brasil
- Fix: Show DFS events in Syslog
- Fix: WLAN TX errors counting
- Fix: Include ICMP ping request (ICMP type 8) to DMZ Management port exception list
- Fix: NTP client is restarting when server is unreachable
- Fix: Disabling VLAN leaves associated ebtables rules enabled (may cause certain VLAN tagged traffic to not pass link)
- Fix: Reduced CPU usage
- Fix: Dynamic traffic shaping burst limits
- Fix: Disable iptables when changing network role from Router to Bridge
- Fix: IPv6 connectivity delay
- Fix: Station stops passing traffic after some time
- Fix: Aggregation parameters doesn't change after apply
- Fix: Increase TEST mode wait time according DFS wait time period
- Fix: Active channel width is not reported for STA mode after association to AP
- Fix: Do full restart when configuring Frequency List
- Fix: DNS servers disappear after fast restart (PPPoE/DHCP Client mode)
- Fix: Disable IPv6 neighbour discovery
- Fix: Wrong channel width reported in MAIN page after Station disconnect
- Fix: Wireless link disconnect/lockup issue
- Fix: Auto ACK/Distance miscalculation issues
- Fix: Reset button on PoE adapter doesn't trigger factory reset

- WEB UI: airView vertical scrollbar issue
- WEB UI: add dBm labels to signal per chain values
- WEB UI: Constellation diagram optimisation for IE9
- WEB UI: Sometimes "Save" button isn't active after first mouse click
- WEB UI: Show disabled Antenna Gain field for products with integrated antenna
- WEB UI: Distance reporting in MAIN page
- WEB UI: WPA anonymous identity should be not a mandatory option
- WEB UI: Password strength meter
- WEB UI: Output power reporting in Device Info section
- WEB UI: Add client Isolation configuration option
- WEB UI: Low Speed Test result values
- WEB UI: Show Firmware Version in Stations list
- WEB UI: Traffic Shaper. Interface list should not include disabled interfaces
- WEB UI: Doesn't load antenna gain value from configuration file
- WEB UI: Hide "Client Isolation" function for AP-PTP mode
- WEB UI: Switched pairs Cable pair 2 <> Cable pair 0. Added explanations on statuses OPEN, SHORT, TEST FAILED
- WEB UI: Can't edit Startup Date
- WEB UI: No DHCP leases in WEB UI
- WEB UI: Other small changes/improvements
 
====================================================================
Version 7.1-rc (XC) - Release Candidate (November 22, 2014)
---------------------------------------------------------
Important:
- After upgrade to v7.1-rc downgrades to v7.0.x will not be possible due to the major firmware differences

New:
- New: airMAX AC PTMP support
- New: Completely new WEB UI design and new features:
	* TEST mode
	* airView support (runs without breaking wireless connection)
	* Ambient Noise diagram
	* Constellation diagram
	* CINR histogram
	* Ethernet cable diagnostics tool
	* Max Rate selection
	* LAN speed configuration
	* Traffic shaping 

Version 7.0.3-u1 (XC) - Service Release (October 3, 2014)
---------------------------------------------------------
Fixes:
- Fix: Stability issues when passing prioritised traffic
- Fix: Improved performance for long distance 10MHz/30MHz channel bandwidth links
- Fix: Disable Ethernet pause frames

Version 7.0.3 (XC) - Production Release (August 18, 2014)
---------------------------------------------------------
New:
- New: AC product models support

Fixes:
- Fix: Traffic issues/increased latency on long distance links
- Fix: After Site Survey, some statistics are gone
- Fix: Unify 30MHz channel list for US/Puerto Rico and Canada

Improvements:
- Various stability improvements


Version 7.0.2-u1 (XC) - Production Release (July 22, 2014)
----------------------------------------------------------

New:
- New: AC product models support
- New: Opened more channel width options (10MHz/30MHz) 

Improvements:
- WEB UI improvements/extended statistics reporting/instant configuration changes
- Quicker WPA2 connection establishment


Version 7.0.1-u1 (XC)- Production Release (June 19, 2014)
---------------------------------------------------------
New products support, XC product family:
- New: Rocket 5AC Lite support
- New: PowerBeam 5AC 500 support

This FW supports PTP mode only.